Standards register
Legal metrology, safety and performance of devices, temperature, pressure, flow, level, process analysis, control valves and actuators.
Themes concerned: Oil & Gas · Chemical & Petrochemical · DCS
77 standards and rules, 2 of them with a detailed sheet. Each line gives the designation, the subject and the publishing body. An underlined designation leads to its detailed sheet; the target, on the right, puts the standard at the centre of the map.
Metrology and legislation Safety and performance of devices Process analysis Temperature and pressure Flow and level Control valves and actuators NAMUR Switzerland Germany Metrology and legislation 9 2014/32/EU Measuring Instruments Directive Also: MID, 2014/32/UE EU 2014/31/EU Non-automatic Weighing Instruments Directive Also: NAWI EU OIML R 76 Non-automatic weighing instruments OIML OIML R 117 Dynamic measuring systems for liquids other than water OIML ISO/IEC Guide 98-3 Uncertainty of measurement: guide to the expression of uncertainty in measurement Also: GUM, JCGM 100 ISO/IEC ISO/IEC Guide 99 International vocabulary of metrology Also: VIM, JCGM 200 ISO/IEC ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories ISO/IEC ISO 10012 Measurement management systems: requirements for measurement processes and measuring equipment ISO Process analysis 4 IEC 61285 Industrial-process control: safety of analyser houses IEC IEC 61831 On-line analyser systems: guide to design and installation IEC IEC 61207 Expression of performance of gas analyzers IEC IEC 60746 Expression of performance of electrochemical analyzers IEC Temperature and pressure 6 IEC 60751 Industrial platinum resistance thermometers and platinum temperature sensors IEC IEC 60584 Thermocouples IEC IEC 61515 Mineral insulated metal-sheathed thermocouple cables and thermocouples IEC ASME PTC 19.3 TW Thermowells: performance test code ASME EN 837 Pressure gauges CEN/CENELEC IEC 61518 Mating dimensions between differential pressure measuring instruments and flanged-on shut-off devices IEC Flow and level 13 ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full ISO ISO 5167-1 General principles and requirements ISO ISO 5167-2 Orifice plates ISO ISO 5167-3 Nozzles and Venturi nozzles ISO ISO 5167-4 Venturi tubes ISO ISO 4006 Measurement of fluid flow in closed conduits: vocabulary and symbols ISO ISO 5168 Measurement of fluid flow: procedures for the evaluation of uncertainties ISO ISO 20456 Guidance for the use of electromagnetic flowmeters for conductive liquids ISO ISO 10790 Coriolis flowmeters: guidance to the selection, installation and use ISO ISO 17089 Ultrasonic meters for gas ISO ISO 12242 Ultrasonic transit-time meters for liquid ISO VDI/VDE 3519 Level measurement of liquids and solids VDI/VDE Control valves and actuators 14 IEC 60534 Industrial-process control valves IEC IEC 60534-1 Control valve terminology and general considerations IEC IEC 60534-2-1 Flow capacity: sizing equations for fluid flow under installed conditions IEC IEC 60534-2-3 Flow capacity: test procedures IEC IEC 60534-4 Inspection and routine testing IEC IEC 60534-8-3 Noise considerations: control valve aerodynamic noise prediction method IEC IEC 60534-8-4 Noise considerations: prediction of noise generated by hydrodynamic flow IEC ISA-75.01.01 Flow equations for sizing control valves ISA ANSI/FCI 70-2 Control valve seat leakage classes FCI IEC 61514 Methods of evaluating the performance of valve positioners with pneumatic outputs IEC ISO 5211 Industrial valves: part-turn actuator attachments ISO ISO 5210 Industrial valves: multi-turn valve actuator attachments ISO VDI/VDE 3845 Interfaces between valves, actuators and auxiliary equipment VDI/VDE EN 15714 Industrial valves: actuators CEN/CENELEC NAMUR 18 NAMUR NE 4 Mounting of positioners and position transmitters to actuators NAMUR NAMUR NE 14 Attachment of pneumatic part-turn actuators to valves NAMUR NAMUR NA 16 Planning of process analyser technology instrumentation and control equipment NAMUR NAMUR NE 19 Mounting of solenoid valves to part-turn actuators NAMUR NAMUR NE 24 Requirements on measuring inserts for temperature sensors NAMUR NAMUR NE 43 Standardization of the Signal Level for Failure Information of Digital Transmitters NAMUR NAMUR NE 53 Software and hardware identification of field devices and signal processing devices NAMUR NAMUR NE 61 Data sheet for process analysers NAMUR NAMUR NE 80 Application of the Pressure Equipment Directive to process control devices NAMUR NAMUR NA 82 Weights and Measures Act (Eichgesetz) for scales and filling installations NAMUR NAMUR NE 89 Temperature transmitters with digital signal processing NAMUR NAMUR NE 95 Basic principles of type testing of process control devices NAMUR NAMUR NE 100 Lists of properties for preparing process control device specifications NAMUR NAMUR NE 107 Self-monitoring and diagnostics of field devices NAMUR NAMUR NE 131 Standard device: requirements for field devices for standard applications NAMUR NAMUR NE 132 Coriolis mass meters NAMUR NAMUR NE 145 Uniform description of the measurement error of field devices NAMUR NAMUR NE 147 Energy accounting measurements in chemical parks NAMUR Switzerland 1 SN 219210 Shut-off devices for pressure gauges SNV Germany 1 DIN 51401 Testing of mineral oil hydrocarbons: atomic absorption spectrometric analysis DIN All domains Automation 